Once programmed, use the device buttons at the top of the remote to switch between controlling different hardware components.
Make sure there are no physical obstacles between the remote and the device's infrared sensor lens. Ensure you are within a 20-foot range.
Make sure you press ENTER or the Device button after the TV shuts off during auto-search. LED Blinks Repeatedly: px-rc1 remote control manual
If the device does not respond, repeat the steps using the next code listed for your brand in the code library. Method 2: Auto Code Search Turn on the device you wish to pair with the remote.
Does it have an IR receiver window? If so, look for a sticker near the battery slot. The frequency is usually 38kHz (Infrared) . Do not confuse this with Bluetooth or RF remotes; the PX-RC1 is strictly IR. Once programmed, use the device buttons at the
If your device manufacturer is not listed in the code table, or if the listed codes do not work, use the Auto Code Search method. This scans the internal database of the PX-RC1. Manually the device you wish to control. Press and release the correct Device Button (e.g., TV).
Insert two (2) AAA batteries (usually required, check your specific unit). Make sure you press ENTER or the Device
Remove the battery compartment cover on the back of the remote.
When the device shuts off, immediately press the or ENTER button to save the working code. The indicator light will flash to confirm. Popular Device Brand Codes