Dt6507 Led Mirror Clock - Instructions

The DT6507 is controlled using five clearly labeled buttons located on the back or top of the unit. Getting familiar with them is key to using the clock:

However, most with model numbers like DT6507 follow nearly identical basic instructions. Here’s a general guide that should work:

The DT6507 LED Mirror Clock features a snooze function that allows you to delay the alarm by 5 minutes. When the alarm goes off, press the "SNOOZE" button to activate the snooze function. The display will show the snooze icon, and the alarm will go off again after 5 minutes.

Set the (e.g., 06:00) using UP/DOWN , then press MODE . Set the End Minute , then press MODE to finalize. 🌡️ Temperature Display Tips dt6507 led mirror clock instructions

If your clock is constantly alternating screens, it is in loop mode. Press the MODE button to select the time display, then press and hold the MODE button until you hear a beep or see the display lock. This fixes the screen exclusively on the time.

Use the or DOWN buttons to set the current hour. (Note: If you selected the 12Hr format, look for a "PM" indicator light on the screen to ensure correct AM/PM configuration).

Press or DOWN to set the correct hour. (Note: In 12H mode, look for a small PM indicator light on the screen). The DT6507 is controlled using five clearly labeled

Press the ALARM button to toggle the alarm on/off. The alarm icon will appear on the screen when active. Snooze Function

Press the button twice to display the current room temperature. While the temperature is on the screen, press the UP button to toggle between Celsius ( °C ) and Fahrenheit ( °F ). 🔧 Troubleshooting and FAQs

The clock requires AAA backup batteries to retain its internal memory when disconnected from USB power. Ensure fresh batteries are properly installed in the back compartment. When the alarm goes off, press the "SNOOZE"

To install the clock on a wall, locate the mounting holes on the back of the clock and use a drill to make holes in the wall that match the screw spacing. Insert the wall anchors and screw in the mounting screws. Hang the clock on the wall, ensuring it is level and secure.

: Cycles through time (12/24H), date (month/day), and indoor temperature (°C/°F). Setup Instructions Summary