Kolbus Da 36 Manual Verified Jun 2026

The longevity of the Kolbus DA 36 is entirely dependent on rigorous maintenance.

: Mechanical folders turn in the top and bottom flaps of the cover material.

Up to 36–40 cycles per minute (depending on the model year and material). Application: Kolbus Da 36 Manual

The Ultimate Guide to the Kolbus DA 36 Case Maker: Operation, Setup, and Manual Insights

and the hot-melt glue tank so the adhesive was just the right viscosity—never too thick to clump, never too thin to fail. He followed the instructions for the corner cutting device The longevity of the Kolbus DA 36 is

Before operating or adjusting the Kolbus DA 36, it is critical to understand its mechanical limits and capabilities. Running materials outside of these parameters can cause jam-ups, poor gluing quality, or mechanical damage. Size Range Capabilities 405 mm x 560 mm (15.94" x 22.05") Minimum Case Size (Open): 110 mm x 155 mm (4.33" x 6.10") Maximum Joint Width: 14 mm (0.55") Turn-in Width: 8 mm to 15 mm (0.31" to 0.59") Material Specifications Board Thickness: 1.0 mm to 4.0 mm (0.04" to 0.16") Spine (Center Strip) Thickness: Up to 3.0 mm (0.12")

The Kolbus DA 36 is a legendary, high-performance automatic case maker widely used in the hardcover bookbinding and packaging industries. Known for its robust mechanical engineering and reliability, it automates the feeding, gluing, placement, and turning-in of cover materials onto cardboard stiffeners. Application: The Ultimate Guide to the Kolbus DA

The manual typically details several critical systems that work in tandem to produce a finished case: Kolbus DA 36 Used machines - Exapro

I can provide targeted troubleshooting steps or mechanical adjustment advice for your Kolbus DA 36. Share public link

Set the knife timing to cut the precise length required for the case height. Step 4: Configuring the Cloth Feeder