ONIE Recovery on x86-enabled Netberg Aurora switches

This page describes how to install the ONIE boot loader on Netberg Aurora switches.

1. Download the recovery image suitable for your switch or build one from GitHub.

Intel Tofino-based switches:

Aurora 610 recovery image

Aurora 710 recovery image

Aurora 750 recovery image

Aurora 810 recovery image

Innovium-based switches:

Aurora 615 recovery image

Aurora 715 recovery image

Broadcom-based switches:

Aurora 221 recovery image

Aurora 621 recovery image

Aurora 721 recovery image

Aurora 820 recovery image

Aurora 830 recovery image

Aurora 420/620/630/720 recovery image for OpenSwitch and ICOS

Aurora 420/620/630/720 recovery image for Open Networking Linux

2. Copy ONIE recovery to a USB thumb device.

Use “dd” command to copy the .iso image to a USB stick:

dd if=onie-recovery-x86_64-netberg_rangeley_p1330-r0.iso of=/dev/sdb bs=10M

3. Connect a USB thumb device to the front panel USB port.

4. Connect to the switch via serial console using standard settings:
delphi ds150e program download

WARNING: Do not use a USB-mini USB cable, it will damage the console port on the switch.

Use the enclosed serial cable.

5. Power on the switch and press <ESC> until entering BIOS.

Go to the “Save & Exit” tab and boot to the USB drive using “Boot override” section.

aurora_bios

6. Embed ONIE to the switch.

embed_onie

7. ONIE is ready after reboot. (Please remove the USB stick)

onie_boot

Delphi Ds150e Program Repack Download -

: Supports newer models and improved firmware compatibility.

Force particulate filter regeneration on modern diesel vehicles right from the laptop. ❓ Troubleshooting Common Errors Error Symptom Potential Cause "Hardware Not Found" Missing drivers or wrong COM port selected.

: Testing specific parts like fuel pumps or cooling fans. delphi ds150e program download

The Delphi software typically requires a Windows-based operating system. Before installation, users must ensure their system meets the minimum hardware requirements and that existing drivers are updated. In the case of unofficial software, guides often maliciously instruct users to disable antivirus programs and Windows Defender, which leaves the computer highly vulnerable.

Open the extracted folder and run the Main.exe or Setup.exe file. : Supports newer models and improved firmware compatibility

Here’s an interesting and informative text about the software download — written for automotive enthusiasts, DIY mechanics, or anyone curious about this legendary diagnostic tool.

After installing the software, you must link your computer to the physical DS150E Vehicle Communication Interface (VCI) multiplexer. : Testing specific parts like fuel pumps or cooling fans

The Delphi DS150E is one of the most popular universal OBD2 diagnostic tools used by mechanics and DIY enthusiasts worldwide. To utilize this powerful hardware, you need the correct software installed on your PC.

The program download usually arrives as a .zip or .rar archive. Right-click the downloaded file.

. This syncs the firmware on the hardware "puck" with the software on your PC. 4. Safety Warning