Cs-2200 Icom Ic-2200h Programming Software (2024)

In the CS-2200 software, go to the "Clone" menu and select "Read." This pulls the current settings from the radio to your PC. Always do this first to ensure you have a baseline backup.

: Easily program and organize the radio's 207 alphanumeric memory channels, including 6 scan edges and 1 call channel. Bank Organization

Permanently adjust the display color (Green/Amber) and brightness settings.

The IC-2200H was produced in US, European, and Asian variants, each with different default frequency restrictions. If you attempt to upload an .icf file built for a European radio into a US radio, the software will block it to prevent out-of-band transmission errors. Always read the radio first, edit that specific file, and write it back. 🔄 Alternative Software Options: CHIRP vs. CS-2200

: Turn the radio off and then back on to exit cloning mode and use your newly programmed channels. CS-2200 Icom IC-2200H Programming Software

You are a normal ham who just wants to hit "Download," type frequencies, and hit "Upload." RT Systems also bundles their excellent cable.

Information on which settings can be shared between the IC-2200H and other Icom VHF mobile units using compatible cloning software.

This is the proprietary Icom software designed specifically for the IC-2200H. It is compatible with most Windows environments. Ensure you have the correct version to match your radio’s firmware. 2. OPC-478 Programming Cable

Adjust time-out timers, auto-power off, keypad beep, and microphone gain. Data Backup: In the CS-2200 software, go to the "Clone"

If your computer does not recognize the programming cable, you likely have a driver issue. If using a Prolific-based aftermarket cable, older drivers are sometimes required to bypass counterfeit chip restrictions. FTDI-based cables generally offer plug-and-play stability on modern Windows systems.

The software is useless without the right hardware. The Icom IC-2200H uses a for programming. You cannot use a standard USB printer cable.

Any tips or pointers appreciated. I’d really like to avoid manually punching in 100+ memories via the front panel.

The official Icom USB-to-3.5mm stereo jack cable. Always read the radio first, edit that specific

Once your spreadsheet is complete, send the data back to the hardware:

This is the official Icom USB cloning cable. It connects to your PC’s USB port and plugs into the speaker (SP) jack on the back of the IC-2200H.

What do you have (Official Icom or aftermarket)? Are you encountering a specific error message ?

installed, software is almost essential for configuring D-Star digital call signs and settings. External Data Links : Modern tools like the WCS-2200 Programmer

To program your Icom IC-2200H Go to product viewer dialog for this item.