Motorola Cp1300 — Frequency List

Verify your radio's exact model number on the chassis sticker underneath the battery to determine your band split: Frequency Range Common Applications 136 – 174 MHz Outdoor use, rural areas, open spaces UHF Band 1 (Ultra High Frequency) 403 – 446 MHz Indoor use, urban areas, dense structures UHF Band 2 (Ultra High Frequency) 435 – 480 MHz Commercial complexes, public safety overlays 2. Default Commercial Frequency List

A complete must include tones. Common default tones include:

350 - 390 MHz (Available in select regions)

using the front panel buttons or Customer Programming Software (CPS). www.motorolasolutions.com

5W (VHF) / 4W (UHF) for high power; 1W for low power to conserve battery life. 2. Standard Motorola CP1300 Frequency Lists motorola cp1300 frequency list

Programming the Motorola CP1300 is relatively straightforward, and users can customize the radio to meet their specific needs. The radio can be programmed using a variety of methods, including:

| Category | Specification | | :--- | :--- | | | | Dimensions (Li-Ion) | 120 x 55 x 35.5 mm | | Weight (Li-Ion) | 335 g | | Battery Life (High Power) | Up to 11 hours (Li-Ion) / 9 hours (NiMH) | | Battery Life (High Cap.) | Up to 16 hours | | Environmental & Durability | | Operating Temp. | -30°C to +60°C | | Sealing | IP54 (dust & splash resistant) | | MIL-STD | 810 C, D, E, F (tested for shock, vibration, rain, humidity) | | Transmitter (Tx) Specs | | RF Output (VHF) | 5W / 1W | | RF Output (UHF) | 4W / 1W | | Modulation | 11K0F3E @12.5kHz / 16K0F3E @25kHz | | Receiver (Rx) Specs | | Sensitivity (12dB SINAD) | < -119 dBm (0.25µV) | | Adjacent Channel Selectivity | >70dB (25kHz) / >65dB (12.5kHz) | | Audio Output | 500 mW @ 24 ohms |

For UHF models operating in regions that allow license-free PMR446 frequencies (such as parts of Europe and Asia), the CP1300 is frequently programmed with the following 8 or 16-channel standard frequency list: Frequency (MHz) Channel Spacing 4. How to Program the Frequency List into Motorola CP1300

Understanding the Motorola CP1300 Frequency List: A Comprehensive Guide The Motorola CP1300 Verify your radio's exact model number on the

Check the label under the battery. You will see a model number like . The critical part is the third block of letters.

Ensure both the transmitting and receiving radios have the programmed on the selected channel, or they will not hear each other.

The CP1300 requires a computer, specific software, and a programming cable to set frequencies. This is done using Motorola’s .

When people search for a frequency list , they often forget about privacy tones. Two CP1300s can be on the (e.g., 464.500 MHz) but not hear each other because they have different CTCSS (Continuous Tone Coded Squelch System) or DPL (Digital Private Line) tones. The radio can be programmed using a variety

Below is the definitive reference guide for the Motorola CP1300 frequency lists, band splits, and step-by-step programming instructions. 1. Motorola CP1300 Frequency Band Splits

In the United States and many other regions, regulatory mandates require commercial radios to operate in narrow-band mode (12.5 kHz). If your

Windows-based operating system with an assigned COM port. Step-by-Step Software Programming

Note: Frequencies above 470 MHz vary heavily depending on local country allocations. Always cross-reference your local telecommunications authority regulations before transmitting. Technical Specifications for Frequency Configuration

. This software allows you to input specific Transmit (TX) and Receive (RX) frequencies, as well as TPL/DPL (privacy) codes. Hardware Requirements : A specific CPS programming cable