Sp Flash Tool Stuck At ((full)) Download Da 100 Info

If the battery is removable, pull it out for 10 seconds and reinsert it.

Modern MediaTek devices feature a secure boot lock that stops unauthorized software from flashing the storage drive. If your device requires an authentication file, the SP Flash Tool will freeze right after loading the DA.

Poor connections are the most common cause.

The phone may not be in the correct "switched off" state or might have lost power mid-process. 2. Recommended Solutions Action Category Specific Steps to Take Driver Refresh sp flash tool stuck at download da 100

Ensure the device has at least 50% charge. If the phone is completely dead, the motherboard won't have enough power to activate the EMMC/UFS storage chip when the DA requests access.

If the physical connection is sound, the problem may be with the software versions.

Open Windows , click Action > Add legacy hardware , and manually select the .inf driver file. If the battery is removable, pull it out

Incorrect or outdated MediaTek USB VCOM drivers.

Some MediaTek devices refuse to enter download mode properly if the battery is too low, too high, or if the device is powered on. Many models require the battery to be and the device completely powered off .

In this article, we’ll explain what "DA" means, why this error happens, and provide a step-by-step guide to get you flashing again. Poor connections are the most common cause

The Download Agent (DA) is a small piece of code responsible for interacting with your phone's internal storage (eMMc or UFS). When the progress bar hits 100% and freezes, it usually points to one of three issues:

In SP Flash Tool, click the Choose button next to the "Download-Agent" field.

: Ensure you are using a high-quality, data-sync-capable USB cable. Avoid loose ports or charging-only cables. 5. Force a Hard Reset and Dynamic Key Combos