Synyster Gates’ lead tone is articulate, warm, and sustain-heavy, often utilizing his signature bridge pickup for complex solos.
Add a subtle Delay (Digital Delay) for depth and a Reverb (Plate) to simulate a studio environment. 4. The Secret Sauce: ToneNET Presets
4x12 cabs with Celestion speakers (specifically V30s).
Place the Dynamic 57 slightly off-axis, right where the speaker cone meets the dust cap. This captures the aggressive "bite" of the pick attack.
If you are trying to replicate this massive sonic footprint without dropping thousands of dollars on a room full of physical Mesa Boogie® and Schecter gear, IK Multimedia’s is your ultimate weapon. This software modeling powerhouse contains all the amps, cabs, and stompboxes you need to summon a bone-crushing guitar tone. 1. The Core Ingredients: The Guitars and Pickups
Use a 4x12 Modern Recto cabinet. Use a Dynamic 57 (SM57) on axis for bite, and a Condenser 87 (U87) off-axis for body. 3. Dialing in the Lead Tone (Synyster Gates)
: Many iconic A7X tracks use Drop D or Drop C# . Use the built-in tuner in AmpliTube 5 to match these exactly. Community Presets
, you can achieve Synyster Gates and Zacky Vengeance's signature tones using the software's existing gear models and community presets.
Historically, the band achieved this blend using custom Schecter guitars equipped with high-output humbuckers, driven into specialized high-gain tube amplifiers. AmpliTube 5 provides the exact digital signal processing components needed to replicate these complex hardware configurations. Critical Gear Components for the A7X Sound
: Use a Tube Screamer (the "Overscream" model) in front of the amp with low gain and high volume to tighten the low end for fast riffs.
Lower Bass on the amp, use dual-mic setup on the V30 cabinet.
: For an even more aggressive, modern attack, the Bogner Uberschall or Peavey 5150/6505 models are highly effective. 2. Signature EQ and Gain Settings
6.5 to 7.5 . Avoid maxing out the gain to prevent the tone from turning into a fuzzy mess. Option B: The Classic A7X Tone (The Marshall Route)
For years, fans tried to replicate the A7X tone using generic high-gain amp sims. While close approximations were possible, the distinct "crunch" and "singing" lead tones of Synyster Gates remained elusive.
Combine a dynamic mic (like a Shure SM57) for "bite" with a ribbon mic (like a Royer 121) for "body." 3. The Signal Chain: Pedals and Racks
Maximize this to 10 . This hits the front of the virtual amplifier hard, increasing sustain.
The Diezel VH4 (Channel 3) is the core of Synyster Gates’ modern tone (2016–present). AmpliTube 5 does not include Diezel in the base version. You must buy the AmpliTube Diezel VH4 Collection (≈$99.99 USD) from IK’s Custom Shop.
: Place a Tube Screamer (the "OverS" model in AmpliTube) before the amp. Set the Drive to 0 and the Level to 8–10 to act as a "tightener" for the high gain. Cabinet & Mics : Use a 4x12 Rectifier or 4x12 Vintage 30 cabinet. In the Volumetric Room, use a Dynamic 57
Amplitube 5 Avenged Sevenfold — Instant Download
Synyster Gates’ lead tone is articulate, warm, and sustain-heavy, often utilizing his signature bridge pickup for complex solos.
Add a subtle Delay (Digital Delay) for depth and a Reverb (Plate) to simulate a studio environment. 4. The Secret Sauce: ToneNET Presets
4x12 cabs with Celestion speakers (specifically V30s).
Place the Dynamic 57 slightly off-axis, right where the speaker cone meets the dust cap. This captures the aggressive "bite" of the pick attack.
If you are trying to replicate this massive sonic footprint without dropping thousands of dollars on a room full of physical Mesa Boogie® and Schecter gear, IK Multimedia’s is your ultimate weapon. This software modeling powerhouse contains all the amps, cabs, and stompboxes you need to summon a bone-crushing guitar tone. 1. The Core Ingredients: The Guitars and Pickups amplitube 5 avenged sevenfold
Use a 4x12 Modern Recto cabinet. Use a Dynamic 57 (SM57) on axis for bite, and a Condenser 87 (U87) off-axis for body. 3. Dialing in the Lead Tone (Synyster Gates)
: Many iconic A7X tracks use Drop D or Drop C# . Use the built-in tuner in AmpliTube 5 to match these exactly. Community Presets
, you can achieve Synyster Gates and Zacky Vengeance's signature tones using the software's existing gear models and community presets.
Historically, the band achieved this blend using custom Schecter guitars equipped with high-output humbuckers, driven into specialized high-gain tube amplifiers. AmpliTube 5 provides the exact digital signal processing components needed to replicate these complex hardware configurations. Critical Gear Components for the A7X Sound Synyster Gates’ lead tone is articulate, warm, and
: Use a Tube Screamer (the "Overscream" model) in front of the amp with low gain and high volume to tighten the low end for fast riffs.
Lower Bass on the amp, use dual-mic setup on the V30 cabinet.
: For an even more aggressive, modern attack, the Bogner Uberschall or Peavey 5150/6505 models are highly effective. 2. Signature EQ and Gain Settings
6.5 to 7.5 . Avoid maxing out the gain to prevent the tone from turning into a fuzzy mess. Option B: The Classic A7X Tone (The Marshall Route) The Secret Sauce: ToneNET Presets 4x12 cabs with
For years, fans tried to replicate the A7X tone using generic high-gain amp sims. While close approximations were possible, the distinct "crunch" and "singing" lead tones of Synyster Gates remained elusive.
Combine a dynamic mic (like a Shure SM57) for "bite" with a ribbon mic (like a Royer 121) for "body." 3. The Signal Chain: Pedals and Racks
Maximize this to 10 . This hits the front of the virtual amplifier hard, increasing sustain.
The Diezel VH4 (Channel 3) is the core of Synyster Gates’ modern tone (2016–present). AmpliTube 5 does not include Diezel in the base version. You must buy the AmpliTube Diezel VH4 Collection (≈$99.99 USD) from IK’s Custom Shop.
: Place a Tube Screamer (the "OverS" model in AmpliTube) before the amp. Set the Drive to 0 and the Level to 8–10 to act as a "tightener" for the high gain. Cabinet & Mics : Use a 4x12 Rectifier or 4x12 Vintage 30 cabinet. In the Volumetric Room, use a Dynamic 57