Cp Plus Firmware Update [DIRECT]
Click and select the .bin firmware file stored on your local computer.
Connect your PC to the same network as your NVR/DVR.
If an update is available, tap . Keep the app open and ensure your smartphone stays connected to Wi-Fi until the camera successfully reboots. Troubleshooting Common Update Failures
: If problems persist, contact CP Plus technical support with your device model number and current firmware version.
Confirm the drive is formatted to FAT32. Ensure you extracted the .bin file from the downloaded .zip file before moving it to the drive. Symptom: The Progress Bar Freezes cp plus firmware update
Regular firmware updates are essential for CP Plus devices to ensure they continue to operate efficiently and effectively. Here are some reasons why CP Plus firmware updates are crucial:
Updating the firmware of a CP Plus device is a relatively straightforward process. Here are the steps:
After the firmware update is complete and the device reboots:
Firmware is the permanent software programmed into your device's read-only memory. Updating it, or "flashing" it, provides several benefits: Click and select the
Before downloading any firmware, you must know your exact device model number. This information is typically found on:
If updating via USB, use a high-quality drive formatted to FAT32 . Method 1: Updating CP Plus DVR/NVR via USB (Recommended)
Before updating the firmware of your CP Plus device, make sure:
CP Plus NVR Firmware Download (Dec 2025) - Eye Tech Securities Keep the app open and ensure your smartphone
: Copy the firmware file (typically a .bin file) to the root directory of the microSD card. Do not place it inside any folders. Also, do not rename the file unless instructions specify otherwise.
The firmware installation was corrupted or interrupted.
Open Internet Explorer (or Edge in Internet Explorer compatibility mode) and type the IP address of your device into the address bar. Log in with your admin username and password. Step 3: Upload the Firmware