Adjustment Program Epson Px660 -

Open the extracted folder, locate the AdjProg.exe file, right-click it, and select . Click the Select button at the top of the interface. In the Model Name dropdown menu, choose PX660 .

This means the software cannot see the printer. Check your USB cable connection, try a different USB port on your PC, and ensure no print jobs are stuck in the Windows print queue.

Once you see “Service Required” or error code 0x9A , the printer is bricked until you run this software.

If you reset the counter and continue printing heavily without addressing the physical pads, the ink will eventually oversaturate the foam and leak out of the bottom of your machine. To prevent this, you have two options: adjustment program epson px660

The Epson PX660 is a robust photo printer (Claria ink, 6-color system) that should not be thrown away due to a simple counter lock. The adjustment program gives you full control over your hardware.

To help me tailor this guide or assist with any issues, please tell me:

Open the small hatch at the back/bottom of the printer, remove the old, ink-soaked foam blocks, and insert fresh replacement pads. Open the extracted folder, locate the AdjProg

Inside your Epson PX660 are physical porous pads called Waste Ink Pads. Every time your printer cleans its printhead or primes the ink cartridges, a small amount of ink is pumped into these pads.

Epson printers use an internal counter to estimate how full these pads are. Once this counter reaches 100%, the printer locks itself down to prevent excess ink from leaking out of the machine and damaging your desk.

: The program typically runs on Windows (XP, Vista, 7, 8, 10). For older versions, you may need to run it in Compatibility Mode for Windows XP. Connection : Connect the printer directly to your computer via a This means the software cannot see the printer

If you own any of the above, the adjustment program for the PX660 will likely work, provided you select the correct model in the software.

If you reset the counter three or four times without changing the pads, you will wake up to a puddle of black ink on your desk.

Necessary if the print head is replaced. The program writes the unique head ID to the mainboard to ensure correct voltage and ink droplet timing.