: Most municipal building departments require black-and-white prints.
file, you must place it in the specific folder AutoCAD monitors. Open Plot Style Manager : In AutoCAD, type STYLESMANAGER into the command line and press Paste the File : A Windows Explorer window will open. Copy and paste your monochrome.ctb file directly into this folder. Refresh AutoCAD
A dialog box will confirm the conversion from "Named Plot Styles" (STB) to "Color Dependent" (CTB). After this, the monochrome option should reappear. 3. How to "Download" or Restore Autocad Monochrome Ctb File Download
[Your CTB File] ---> Copy ---> Paste into AutoCAD Plot Styles Folder ---> Restart PLOT Command Step 1: Locate Your Plot Styles Folder
Note: The typical default path looks like this: C:\Users\[YourUsername]\AppData\Roaming\Autodesk\AutoCAD [Version]\R[Version]\[Language]\Plotters\Plot Styles Step 2: Paste the Downloaded CTB File Copy your downloaded monochrome.ctb file. Copy and paste your monochrome
| Color | Plot Color | Lineweight | Screening | Dithering | Purpose | | :--- | :--- | :--- | :--- | :--- | :--- | | | Black | 0.35 mm | 100% | Off | Cut lines / Bold geometry | | 2 (Yellow) | Black | 0.25 mm | 100% | Off | Medium detail | | 3 (Green) | Black | 0.18 mm | 100% | Off | Fine detail / Dimensions | | 4 (Cyan) | Black | 0.13 mm | 100% | Off | Hatching / Textures | | 5 (Blue) | Black | 0.50 mm | 100% | Off | Section cuts / Title borders | | 6 (Magenta) | Black | 0.70 mm | 100% | Off | Heavy outlines | | 7 (White/Black) | Black | 0.00 mm | 100% | Off | Basic lines (use Lineweight by layer) | | 8 (Dark Gray) | Black | 0.13 mm | 45% | On | Existing conditions / Xref fade | | 9 (Light Gray) | Black | 0.09 mm | 25% | On | Very faint backgrounds | | 250+ | Black | 0.00 mm | 90% | On | Hatch patterns |
Downloading the file is step one. Putting it in the right folder is step two. AutoCAD won't see the file unless it is in the Plot Styles folder. the monochrome option should reappear.
If you placed the file in the styles folder but it won't show up in the Page Setup Manager, your drawing is likely set to use instead of CTB.
If you have added the file but still don't see it, your drawing might be set to use (Named Plot Styles). Use the command CONVERTPSTYLES to switch the drawing to (Color-Dependent Plot Styles). Autodesk Community, Autodesk Forums, Autodesk Forum customize the lineweights within your monochrome file once it's installed?