Your session has expired. Please log in again.
: Includes procedures for mechanical tests (pull-out force, vibration endurance), electrical tests (contact resistance, current-carrying capacity), and climatic tests (dry heat, damp heat, temperature cycling). Classification
DIN EN 60352-2 is a European standard that defines the requirements for solderless connections using insulation displacement (ID) connectors. The standard is equivalent to the international standard IEC 60352-2. The document provides detailed specifications for the design, testing, and application of ID connectors, which are widely used in various electronic devices, including telecommunications equipment, consumer electronics, and industrial control systems.
The 2006 edition used different conductor classes. The 2020 revision aligns with newer fine-stranded wires (Class 5 and 6 per IEC 60228). Always verify the edition date in your PDF header.
Ensure your pull tester and micrometer are calibrated traceable to ISO/IEC 17025. The standard does not specify brands, but it does require a pulling speed of 25 ± 5 mm/min. din en 60352-2 pdf
Avoid free PDFs from random websites. Many are outdated (e.g., 2006 edition vs. 2024 edition), missing critical annexes, or contain corrupted tables. A wrong crimp height spec can literally cause the failure in the story.
She pulled the wire with a small force gauge: 148 N before the wire broke—outside the terminal. The connection itself held.
DIN EN 60352-2 standard (equivalent to IEC 60352-2) is the primary international technical specification for crimped connections : Includes procedures for mechanical tests (pull-out force,
The standard is the European adoption of the international IEC 60352-2 standard, which governs the technical requirements and testing procedures for solderless crimped connections .
Marcus opened the PDF and pointed to the . The standard covers stranded wires from 0.05 mm² to 10 mm² and solid wires from 0.25 mm to 3.6 mm . He checked their current assembly: they were trying to crimp a 12 mm² cable using a tool only rated up to 10 mm²—a classic AWG mismatch . Step 2: The Tensile Test
A crimped connection must be a cold weld —the wire strands and the terminal barrel must deform plastically into a single, gas-tight, homogeneous mass. No solder. No screw. Just a controlled crush. Always verify the edition date in your PDF header
: Requirements for the crimp height, width, and visual characteristics (e.g., no cracked insulation, all wire strands captured).
The standard defines a crimp connection as a permanent, solderless joint formed by displacing and deforming a barrel-shaped terminal around a stranded or solid conductor. This mechanical deformation creates a gas-tight, low-resistance electrical pathway. Key Requirements of the Standard