Dust and moisture can degrade video quality. Gently wipe the camera lens with a microfiber cloth periodically.
Perform modifications (e.g., enabling , changing default scripts, or adding custom binaries). Repack and Pad :
Occasionally, firmware updates do not go as planned. If you are experiencing issues with your V380 camera after an update, or if an update gets stuck, try these troubleshooting steps: 1. The Update Fails or Gets Stuck
| Component | Description | |-----------|-------------| | | Customized for Ingenic SoC; handles recovery and flashing | | Linux kernel | Version 3.10.x to 4.9.x (often old, with security vulnerabilities) | | Root filesystem | SquashFS or JFFS2, read-only | | App binaries | vm (videomain), nvram_daemon , cloud , p2p , httpd | | Device tree | Pin muxing, sensor config (OV9732, SC2235, IMX307, etc.) | | Web interface (limited) | Usually only system.ini , wifi.conf accessible via HTTP on port 80 or 8080 | | Configuration NVRAM | Stores Wi-Fi credentials, P2P UID, user password (often base64 or XOR-obfuscated) |
A well-updated V380 camera—running firmware from 2023 or later—can be surprisingly reliable for its price. Use motion detection zones with a microSD card recording continuously, and you have a decent budget surveillance system.
In 2024-2025, the V380 ecosystem is fragmenting:
Because "V380" is a very generic term used by hundreds of different Chinese manufacturers for a wide range of IP cameras (bulb cameras, dome cameras, outdoor bullet cameras, and robots), there isn't one single "V380 Firmware."
Use manual TF card update. Find the firmware from the same batch as your camera—matching the sensor (e.g., OV2710 vs IMX323). Join a V380 user group on Telegram or Reddit (r/ipcam).
Locate your camera tile within the primary device list and tap the gear icon in the lower right corner. Tap on Device Information to view your hardware parameters.
The term refers primarily to a popular, low-cost line of IP security cameras (often indoor pan/tilt or fixed mini cameras) and, more critically, to the V380 Pro mobile app used to control them. The firmware is the low-level software embedded directly on the camera’s hardware. It controls everything from video encoding and Wi-Fi connectivity to motion detection and communication with the V380 app.
Most users will find the official update process, executed through the V380 mobile app, to be the safest and most straightforward method. This is the path recommended by the official manufacturer website and is designed to be user-friendly. Here is a typical sequence:
Dust and moisture can degrade video quality. Gently wipe the camera lens with a microfiber cloth periodically.
Perform modifications (e.g., enabling , changing default scripts, or adding custom binaries). Repack and Pad :
Occasionally, firmware updates do not go as planned. If you are experiencing issues with your V380 camera after an update, or if an update gets stuck, try these troubleshooting steps: 1. The Update Fails or Gets Stuck v380 firmware
| Component | Description | |-----------|-------------| | | Customized for Ingenic SoC; handles recovery and flashing | | Linux kernel | Version 3.10.x to 4.9.x (often old, with security vulnerabilities) | | Root filesystem | SquashFS or JFFS2, read-only | | App binaries | vm (videomain), nvram_daemon , cloud , p2p , httpd | | Device tree | Pin muxing, sensor config (OV9732, SC2235, IMX307, etc.) | | Web interface (limited) | Usually only system.ini , wifi.conf accessible via HTTP on port 80 or 8080 | | Configuration NVRAM | Stores Wi-Fi credentials, P2P UID, user password (often base64 or XOR-obfuscated) |
A well-updated V380 camera—running firmware from 2023 or later—can be surprisingly reliable for its price. Use motion detection zones with a microSD card recording continuously, and you have a decent budget surveillance system. Dust and moisture can degrade video quality
In 2024-2025, the V380 ecosystem is fragmenting:
Because "V380" is a very generic term used by hundreds of different Chinese manufacturers for a wide range of IP cameras (bulb cameras, dome cameras, outdoor bullet cameras, and robots), there isn't one single "V380 Firmware." Repack and Pad : Occasionally, firmware updates do
Use manual TF card update. Find the firmware from the same batch as your camera—matching the sensor (e.g., OV2710 vs IMX323). Join a V380 user group on Telegram or Reddit (r/ipcam).
Locate your camera tile within the primary device list and tap the gear icon in the lower right corner. Tap on Device Information to view your hardware parameters.
The term refers primarily to a popular, low-cost line of IP security cameras (often indoor pan/tilt or fixed mini cameras) and, more critically, to the V380 Pro mobile app used to control them. The firmware is the low-level software embedded directly on the camera’s hardware. It controls everything from video encoding and Wi-Fi connectivity to motion detection and communication with the V380 app.
Most users will find the official update process, executed through the V380 mobile app, to be the safest and most straightforward method. This is the path recommended by the official manufacturer website and is designed to be user-friendly. Here is a typical sequence:
Don't have an account yet? Sign up for free
Please enter your username or email address. You will receive a link to create a new password via email. Remember now? Back to login
Already have an account? Log in
