Hitarget V30 Plus Manual ((top)) Jun 2026

Hot-swappable batteries provide extended operational time in the field.

Once you are within your target tolerance range, the interface turns green. Drive your stake into the ground. 6. Data Export and Management Exporting Survey Data Navigate to the tab and select Export .

Input the CORS , Port , CORS Username , and Password . Tap Get Access Point and select the nearest mountpoint. Apply the settings to receive network corrections. 5. Field Surveying and Data Collection

Secure the receiver on a tripod over a known point using a tribrach. Antenna: Attach the UHF antenna if using internal radio.

This comprehensive technical guide outlines the system's hardware, operations, static surveying configurations, and dynamic RTK survey settings as structured in the official user documentation. Hardware Overview and Build hitarget v30 plus manual

The official is available for download on ManualsLib. Before anything else, always unpack and inspect your new receiver. The standard package contents may vary by order, so compare them with your delivery slip. If anything is missing or damaged, contact your dealer immediately.

Insert the Hi-Target BL-5000 lithium-ion battery, ensuring the metal contacts align properly. Replace the cover and turn the latch clockwise to lock it.

Ensure Channel, Frequency, and Protocol match the Base Station exactly . Once connected, the status should change to FIX . 5. Field Operations & Data Collection

Contact and Support Refer to the product packaging or supplier for warranty, service, and full technical documentation. Tap Get Access Point and select the nearest mountpoint

Connect the CL-4400 charger to an AC outlet. A solid red light indicates charging, while a solid green light indicates a full charge. Base Station Assembly

To ensure the longevity of your equipment, follow these manual-recommended tips:

If you need a specific section expanded—like or Internal Radio Setup —just let me know which area you'd like to focus on! Share public link

: Long press the power button for 1 second until the voice prompt sounds. Connection : Pair the receiver with a field controller (e.g., ) via Bluetooth or NFC quick connection. 2. Survey Mode Configuration 4.1 Connecting via Bluetooth/NFC

Protects the internal tracking architecture and interfaces. It includes a high-capacity lithium battery compartment, standard five-pin and eight-pin communication ports, and a mini-USB port that supports Quick Upgrade Firmware and On-The-Go (OTG) data transfer.

Move to an open area; check that the UHF antennas are tightly screwed in. Controller paired with wrong device

: Power on the rover receiver and connect it to the controller.

The V30 Plus is usually controlled via the Android application. 4.1 Connecting via Bluetooth/NFC