!!better!!: Prosecure Opti Combi Manual English

Understanding the technical limits of the sensor prevents installation failures and hardware damage.

If the sensor encounters an issue, the integrated multi-color LED will change from its standard states (Green = Standby, Red = Activation, Amber = Safety Presence). Environment change detected. Fix: Clear the threshold and execute a new Teach-In cycle. Flashing Amber: Infrared lenses are dirty or blocked.

Ensure there is at least 50mm of clearance above the sensor to allow the cover to clip off easily. Step 2: Drilling Tape the included mounting template to the header profile.

Adjust the rows of infrared spots to ensure they cover the threshold of the door. prosecure opti combi manual english

Tilt the radar module upward or adjust the infrared curtain slightly away from the door panel. Tighten mounting screws. Infrared curtain is blocked or matrix setup failed.

to safeguard the passage area and prevent doors from closing on pedestrians Compliance: Certain models are designed to meet safety standards like

Avoids crosstalk when two sensors face each other. (High / Low) Radar Directionality Understanding the technical limits of the sensor prevents

Note: Some industrial variations include additional blue or black wires dedicated to external monitoring test inputs required by local safety codes (such as EN 16005). 4. Dip Switch Programming and Field Adjustments

Changes operating frequency to prevent cross-talk between twin doors. Active Open / Active Closed Active Open

The Opti-Combi integrates several functions into a single unit: Fix: Clear the threshold and execute a new Teach-In cycle

After the sensor is mounted and wired, a basic function test must be performed before the door is put into service.

Carefully remove the cover, ensuring not to damage the internal electronics.

The sensor sees a permanent change in environment. Clean the lens and execute an . Flashing Red (Fast) Internal Sensor Fault