Thyssenkrupp Levant Stair Lift Installation Manual !!top!! Full -

Secure the wire using plastic clips to ensure it cannot catch on the moving carriage. Step 3: Plug in the Transformer

: For checking battery voltage and charging circuit continuity. Structural Verification

The motorized drive unit containing the motor, circuit board, and batteries.

Space the brackets evenly. Place the bottom bracket on the first tread, the top bracket on the top landing tread, and intermediate brackets every 3 to 4 stairs. thyssenkrupp levant stair lift installation manual full

: Slide the power pack (motor and carriage) onto the rail. The Levant uses a rack-and-pinion drive system .

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

| Test | Procedure | Pass/Fail | |------|-----------|------------| | Obstruction | Place a 2x4 on the stair. Lift must stop on contact. | ____ | | Overload | Apply 150 kg (331 lbs). Lift should stall and beep. | ____ | | Seat belt | Pull sharply—must lock. | ____ | | Parking | Fold seat fully. Unit must fit within 10" of wall. | ____ | | Remote | Range test: 15 meters (50 ft) through one wall. | ____ | | Manual lowering | Insert release key, turn 90°. Lift descends at 0.2 m/s. | ____ | Secure the wire using plastic clips to ensure

The Levant’s seat must swivel to 45° and 90° at the landings.

: Temporarily remove the mechanical buffer end stops from the top of the rail.

Once the physical installation is complete, the manual includes a that must be filled out for warranty registration. It asks for: Space the brackets evenly

View the Levant User Manual for free on Manua.ls .

Connect the red positive (+) lead to the remaining open battery terminal.

sku: Levant. Levant SWL Installation User Manual - DOWNLOAD. MSRP: $25.00. Add to Cart. Access2Parts ThyssenKrupp Flow2 Installing Instalace | PDF - Scribd

Gently slide the carriage down onto the rail from the top landing. Ensure the drive pinion gear meshes smoothly with the rail's gear rack. Slide the carriage down at least 12 inches into the rail.

Carefully slide the main chassis onto the rail. Ensure the safety gears and the main drive pinion engage correctly with the gear rack.