[ 2 ] [ 4 ] [ 6 ] [ 8 ] [10] (Missing Pin) [ 1 ] [ 3 ] [ 5 ] [ 7 ] [ 9 ] Use code with caution. Detailed Pin Assignment Table
Connect the HDD LED to Pin 1 (+) and Pin 3 (-) .
Ignore the reset switch cable as there is no header for it. Troubleshooting the Front Panel If the computer does not turn on:
Here was the puzzle. The MIH61R board used a specific configuration that baffled anyone used to building standard PCs.
Dell motherboards are notorious for running a Power-On Self-Test (POST) that checks for proprietary components. If you perform a case swap, the BIOS might display an error like "Alert! Front I/O Cable not connected."
Connect the Power LED to Pin 2 (+) and Pin 4 (-) .
You can bypass this permanently in some BIOS versions by disabling "Log Keyboard and Panel Errors" under the Boot/Maintenance settings tab.
The Power LED illuminates when the system is operational. LEDs are diodes and require correct polarity to function.
Disclaimer: Proceed with care when connecting front panel wires. Incorrect connections can damage the motherboard.
Most Dell systems of this era, including the Inspiron 620, do not have a dedicated reset switch header. If your case has a reset cable, it will likely remain unused.