Sinotimer Tm630s Manual New! ●

The is a digital programmable weekly timer switch designed for high-load electrical control (up to 30A). It is distinct from the TM630A series primarily because it allows for second-interval settings (down to 1 second) rather than just minutes. 🛠️ Key Specifications Load Capacity: 30A @ 250V AC Timing Range: 1 second to 168 hours Programs: Up to 28 ON/OFF events per day or week

Sinotimer TM630S is a heavy-duty, 7-day digital programmable timer switch designed for both residential and industrial automation. It is characterized by its high-accuracy CMOS chip, 30A load capacity, and 1-second minimum interval timing. Alibaba.com Technical Specifications Power Supply

Before programming, press the button to clear any previous memory. 0;16; 0;381;0;4f6;

Returns to the current time display or enters current time setting mode.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. sinotimer tm630s manual

Connect the directly to the main Neutral line (or Terminal 2 ). ⏱️ Programming Instructions

This is where you connect the main power to run the timer itself. Connect Line/Live (L) to Terminal 1. Connect Neutral (N) to Terminal 2. Terminals 3, 4, and 5 (Channel 1 / Output 1):

From the manual’s technical section:

While holding the button, press M+ to adjust the current minutes. The is a digital programmable weekly timer switch

This comprehensive manual covers the technical specifications, wiring, and step-by-step programming for the TM630S.

Press to select days (e.g., every day, weekdays only, or specific single days). Press H+ , M+ , and S+ to set the exact start time.

If you need help configuring your timer for a specific setup, please let me know: What model you are using (e.g., 220V AC, 12V DC)? What appliances you are wiring to Channel 1 and Channel 2? Your desired On/Off schedule ?

This guide provides a comprehensive, step-by-step for setup, programming, and operation, based on industry standards for this model. 1. Understanding the Sinotimer TM630S It is characterized by its high-accuracy CMOS chip,

The timer automatically executes your programmed schedules based on the current time.

Verify your wiring. Remember that Terminals 3 and 6 are independent "dry" switch contacts. They do not output voltage on their own; you must run a live wire (jumper) into them to switch power outward.

Use the button to cycle through three modes indicated by a line on the screen: 0;16; ON : Forces the load to stay on, overriding all programs. AUTO : Runs your saved ON/OFF schedules.0;77d; OFF : Forces the load to stay off. 0;2a;