Huawei Hg8145v5 Unlock 2021 Jun 2026

Before starting, gather the following:

If you'd like, I can discussing successful unlocks for your specific ISP. hg8145v5 Router User Guide: WiFi Settings & Password Update

Hold the button down for until all the LED lights flash simultaneously and turn off.

Skip the unlock. Buy a cheap standalone GPON ONU (e.g., Huawei MA5671) instead. It's a better long-term solution. huawei hg8145v5 unlock 2021

Because Telnet is disabled by default on newer 2021 firmware updates, you must use a utility called the (often version 2.0 or 3.0). Set a static IP on your computer’s network adapter: IP: 192.168.100.10 Subnet Mask: 255.255.255.0 Gateway: 192.168.100.1 Open the Huawei Ont-Config Tool.

The Huawei HG8145V5 is a popular GPON ONT/router combo provided by ISPs worldwide (from Telmex in Latin America to various carriers in Asia and Europe). In 2021, the topic of "unlocking" was trending because ISPs locked down the device to prevent users from changing bridge mode, altering Wi-Fi settings, or using their own routers.

While the router is ON, press and hold the button for 30 seconds. Wait for the device to reboot. Attempt to log in with telecomadmin / admintelecom . Warning & Disclaimer Before starting, gather the following: If you'd like,

Execute the decryption command: hw_ctree.exe -d hw_ctree.xml decrypted.xml

A more traditional method to unlock Huawei devices involves generating an unlock code (sometimes called a "bootloader code") using the device's IMEI number.

Navigate to > Change adapter settings . Right-click your Ethernet adapter and select Properties . Double-click Internet Protocol Version 4 (TCP/IPv4) . Select Use the following IP address and enter: IP address: 192.168.100.2 Subnet mask: 255.255.255.0 Default gateway: 192.168.100.1 Click OK to save the changes. Step 2: Factory Reset the Router Buy a cheap standalone GPON ONU (e

If your router hasn't been updated recently or is from a smaller ISP, try this first.

Assign the following static IPv4 parameters to your Ethernet adapter: 192.168.100.2 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.100.1 Step 2: Enabling Telnet Access via the Configuration Tool

A safer 2021 approach: Backup original XML, then upload a modified one via TFTP. Use the command:

Select your network card in the multicast tool, load the firmware file, and press .

rm -rf hw_default_ctree.xml cp -rf /etc/wap/hw_default_ctree.xml /mnt/jffs2/hw_default_ctree.xml