Instruction Manual For Motorola Radius Sp10 ❲Official – Handbook❳

Allows the user to select from available channels (typically up to 10 channels).

: Used to check for channel activity before transmitting, often by disabling "coded squelch" (PL/DPL) to hear all traffic on the frequency.

Continue rotating clockwise to increase the volume to a comfortable listening level. Selecting a Channel Instruction Manual For Motorola Radius Sp10

Plug the charger into an outlet and place the entire radio with the battery into the pocket. Rapid Charger: Ideal for fast turnaround times.

When a voice transmission arrives on your frequency, the radio will automatically unmute, and the audio will play through the internal speaker. Transmitting (Sending a Call) Allows the user to select from available channels

: The radio originally came with a 10-hour, 110V wall charging adapter.

Periodically clean the gold-plated battery contacts on both the radio chassis and the battery pack using a pencil eraser or a dedicated electronics contact cleaner to ensure an uninterrupted power supply. 6. Troubleshooting Guide Probable Cause Recommended Solution Radio will not power on Dead or improperly seated battery. Recharge the battery; remove and re-seat the battery pack. Unprovoked static hiss Squelch circuit is open or Monitor button is stuck. Selecting a Channel Plug the charger into an

: To hear all activity on a channel (including those using different privacy codes), use the monitor switch located near the PTT lever. Key Technical Specifications