The command station acts as a hub for CAN network subscribers.

If the system is not functioning correctly, consult the error codes on the display. Below are common issues:

Check the backlash of the internal drive spindle. Update the controller firmware if recommended by Erhardt + Leimer technical service.

Comprehensive Guide to the Erhardt+Leimer DO 8201 Command Station: Manual, Setup, and Troubleshooting

The DO 8201 features a user interface used to calibrate the web position.

Move web to +10 mm and adjust span so output equals configured value (e.g., 7 V for a 0–10 V span).

A structured table mapping hexadecimal or plain-text faults to clear system phenomena (e.g., CAN-bus connection drops, camera exposure failures, tracking loss on high-contrast patche lines). Key Applications Camera computer DO 82 - Erhardt+Leimer

Wiring errors can permanently damage the sensitive CAN bus transceivers. The manual breaks down the termination steps explicitly:

The DO 8201 is part of E+L's advanced digital command station lineup, specifically designed for web guiding applications. It acts as the central brain, processing information from sensors (such as edge sensors) to control actuators that realign the moving web material. Key features often included in this series: