Ensure at least 18" to 20" of clearing distance at the bottom of the stairs for safe parking and boarding. Key Installation Steps
Do not fully tighten the bolts until you check the rail leveling. 4. Installing the Drive Carriage
The rail is typically shipped in sections that must be spliced together on-site. Manually Moving Your Acorn Stairlift
Safety sensors, which stop the lift if an obstacle is encountered, are tested. The seat belt is checked for proper locking and release. 4. Post-Installation: Commissioning and Training
is designed for narrow spaces and can typically be fitted on staircases as narrow as . thyssenkrupp levant stair lift installation manual
The ThyssenKrupp Levant stair lift is a sleek and compact mobility solution designed for indoor and outdoor use. It's available in various models, including the Levant 6000 and Levant 9500, which cater to different staircase configurations and user needs. The Levant stair lift features a sturdy rail system, a comfortable seat, and advanced safety features, making it an ideal solution for people with mobility impairments.
Mark the pilot holes through the bracket base plates onto the steps. Drill pilot holes into the stair treads.
A critical feature for user safety during operation. 2. Pre-Installation: Site Survey and Preparation
For finalizing the power supply connection. Site Inspection Ensure at least 18" to 20" of clearing
Are you dealing with a or performing maintenance on an existing unit? Share public link
The carriage directional surfaces (stops the lift if something is trapped underneath).
Detailed technical documentation for the Levant model is available through specialty parts distributors and archive sites: Installation & User Manuals
Essential for ensuring the rail and brackets are perfectly level. Installing the Drive Carriage The rail is typically
Deburr all cut edges with a metal file to prevent the internal wiring from snagging or chafing during operation.
The outlet should ideally be on a non-switched circuit to prevent accidental power cut-offs to the battery charging system. 2. Component Inventory and Tools Required
Align the rack-and-pinion gear system of the carriage with the teeth on the rail.