Before beginning the installation process, ensure you have the following components ready:
This is the core installation process. The XDPPro installer will automatically prompt you to install the necessary USB drivers and the XINJEConfig tool.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: Always use a shielded USB cable to prevent communication timeouts in noisy industrial environments.
You should now see or a designated "USB Serial Port (COMx)" listed without any yellow warning flags. Note the COM port number (e.g., COM3) if applicable. Step 6: Configure Communication in XBuilder / XCPro xinje plc usb driver install
Download the USB driver directly from the Xinje Official Download Center . Step 2: Connect the Cable
Struggling to connect your XINJE PLC via USB? This 2,500+ word guide covers driver installation for Windows 10/11, common errors (Code 10, 32, 52), manual setup, and software compatibility for XC and XD series.
Plug the other end into an available USB port on your PC (preferably a USB 2.0 port, as they offer better legacy stability).
A small installation wizard will appear. Click or Next . Before beginning the installation process, ensure you have
If you are using a 3rd party programming cable, you may need the CH341 driver specifically. 3. Installation Steps Disconnect the PLC:
Windows will make a chime sound but will likely fail to configure the device automatically. Step 4: Manual Installation via Device Manager
Press the and select Device Manager from the menu.
How to Install the Xinje PLC USB Driver: A Complete Step-by-Step Guide This link or copies made by others cannot be deleted
For persistent issues not covered here, always check the official Xinje website for the most up-to-date software and manuals. Your automation projects are just a few clicks away.
Installing a Xinje PLC USB driver is the "handshake" that lets your PC talk to your industrial hardware. Whether you're using a direct USB cable or a USB-XC programming cable , follow this guide to bridge the gap. 1. Identify Your Cable and Controller Xinje PLCs usually connect in one of two ways: Direct USB Port: Newer models (like the ) often have a built-in USB port. USB-to-Serial Cable: Many older or slim models (XC series) require a specialized USB-XC programming cable . This cable typically uses a or similar chip to convert USB to RS232. 2. Download the Driver Do not rely on Windows to find the driver automatically. Visit the official Xinje Download Center Look for the "USB driver" "USB-to-Serial" driver under the software or tools section.
Power on your Xinje PLC using the correct power supply (24VDC or 220VAC depending on the model).
Alternatively, press Win + R , type devmgmt.msc , and hit . Locate the PLC Device Look for a device with a yellow triangle icon.