Observe the digital display for the voltage reading (kV) and the bar graph for polarity (Positive or Negative).

use cotton swabs, solvents, or liquids inside the sensor cavity, as this will permanently damage the delicate sensor blades. Troubleshooting Guide Probable Cause Corrective Action Meter reads high values constantly

after approximately 5 minutes of inactivity to preserve battery life. Safety & Build : The housing is made of conductive resin (ABS)

| Issue | Possible Cause | Solution | | :--- | :--- | :--- | | | Dead battery | Replace 9V battery. | | Erratic/Fluctuating readings | Low battery or sensor contamination | Replace battery. Ensure sensor window is clean. | | Cannot zero | Strong field present during startup | Move to a neutral area and power cycle the unit. | | Readings stuck at max | Field too strong or internal damage | Move away from the source. If issue persists, service required. |

Solution: Clean the sensor with alcohol. If the error persists, the unit requires factory repair.

~1.2 MB Language: English (German/French appendices included in full version)

Need the full user manual for the Simco FMX-002 electrostatic fieldmeter? Find direct download links, setup instructions, calibration tips, and troubleshooting advice here.

The SIMCO FMX-002 is a compact, pocket-sized electrostatic fieldmeter used to locate and measure static charges. It measures voltages within +/-22kV at a distance of 1 inch (25mm). The results are displayed simultaneously on a digital readout and a color bar graph. This guide serves as a comprehensive operational manual for the FMX-002, covering specifications, operation, calibration, and maintenance. 1. Technical Specifications Specification

Press the POWER button. You will hear a single beep.

Mount the FMX-002 into the fixture and align it exactly 1 inch from the uncharged metal plate. Ground the FMX-002 housing and turn it on. Press .

Simco FMX-002 Electrostatic Fieldmeter: Complete Operation & Calibration Manual

Simco FMX-002 is a portable, handheld digital electrostatic fieldmeter designed to locate and measure static charges. Key features and technical specifications derived from the Simco FMX-002 Product Manual Core Measurement Capabilities Dual Range Measurement : 0 to ±1.49 kV. High Range : ±1.0 kV to ±20.0 kV (auto-ranging). Ion Balance Mode

Uses two LED guide lights; when these two points converge into a concentric circle on the target surface, the meter is at the correct 1-inch (25mm) measuring distance. Power: Operates on a standard 9V battery. Quick Operating Guide Simco FMX-002 Electrostatic Fieldmeter Calibration

Located at the top of the unit; contains the oscillating sensor element.