Xizi Otis Elevator Manual Upd -

The generally covers several key technical modules. Understanding these ensures that maintenance crews are working with the correct parameters. A. Control System (e.g., MCS, OVF Series)

Establish a solid initial reference by properly connecting terminal points 4T to 5T.

, and the specific "Learn Run" calibration required for safe operation. 1. Pre-Start-Up Requirements xizi otis elevator manual upd

Review the board indicator functions as outlined in the iLift English manual . 2.2. Start-up Procedures (NGSOK)

Bring the elevator car down to the bottom floor on inspection mode. Access the UPD and navigate to TEST -> SHAFT LEARN . Switch the elevator to . The generally covers several key technical modules

Manual suggests disconnecting motor leads from UPD and running “no-load test” using parameter F46 (Force Output).

: Regularly check the E/I-panel battery and verify CAN and SVT communication signals for system health. Control System (e

: Confirm all mechanical elements are locked down, then physically position the DSBD bridging connector across terminals 4T to 5T .

Select for a full calibration run or "0" for standard maintenance mode.

Always follow the updated LOTO procedures outlined in the latest manual.

: Press + or follow the screen prompt displaying Enter new passwd ------ .