However, here is the known information about this device:
VID 1E3D almost always points to an embedded webcam or an integrated fingerprint sensor on a laptop, not an external USB device.
Here’s a clean, professional write-up for the USB device with and PID 198A , incorporating “TOP” as a likely product or brand identifier.
Go to the official ChipSailing repository (or trusted mirror like libusb.info ). Search for CS198A Driver Package v2.1.0 . Note: This driver is often bundled with the "Zadig" tool. usb device id vid 1e3d pid 198a top
Understanding USB Device ID: VID 1E3D PID 198A The USB device identifiers and PID 198A are specific codes that identify a hardware product produced by Chipsbank Microelectronics Co., Ltd. . In technical terms, the VID (Vendor ID) 1E3D points to Chipsbank, while the PID (Product ID) 198A typically represents a "Flash Disk" or a generic USB mass storage controller. Technical Specifications and Device Role
are often used to re-flash the firmware or "reset" the drive to its actual hardware capacity. Hardware Reset:
The device is recognized by the PC but won't open or show up in File Explorer. How to Fix or Manage This Device However, here is the known information about this
The most common question users ask is: "Which company owns VID 1E3D?"
Every USB device plugged into your computer carries a unique signature. This signature, known as the and Product ID (PID) , is the operating system’s first clue to identifying what you’ve connected.
Usually, no. The "No Media" error is a logical failure at the controller level. While the data physically remains on the NAND chip, consumer-grade software cannot bypass a dead or corrupted controller. Professional data recovery services that perform chip-off recovery might be able to help, but this will cost significantly more than a new drive. Search for CS198A Driver Package v2
Plug in your problematic USB drive. The software should detect the USB under VID 1E3D PID 198A or as a CBM2199E controller.
If you have a drive stuck in the "No Media" state, you can often revive it using a process called "mass production." This involves using a low-level tool from Chipsbank to re-initialize the controller and format the flash memory.
You are experiencing the same logical failure described above. On Linux, you will need to use a Windows virtual machine or a separate Windows PC to run the Chipsbank mass production tools. Native Linux tools cannot perform this low-level initialization.