Xinje Plc - Program Tool 3.7

Version 3.7 is widely used for several Xinje series, including: XD/XL Series

: Check the box for USB Download Driver when prompted to ensure the PC recognizes the PLC.

| Series | Key Included Models | | :--- | :--- | | | XG1, XG2 | | XD | XDE, XDM, XD1, XD2, XD3, XD3E (N), XD5E, XD5, XDC, XDH, XDME, XDQ7 | | XK | XKME, XK1, XK3, XK5E, XK5, XKH | | XL | XLME, XL1, XL3, XL5E, XL5E (N), XL5, XLH, XL5H, XL5N, XLQ7 | | XE | XEM, XE1, XEC, XE2, XE3, XE5E, XE3E, XE3E (N), XEE, XE5, XEH, XEME, XEQ7 | | RC | RC6H, RC2, RC3, RC6, RC6F |

One of the most praised aspects of version 3.7 is its online monitoring capability. Users can connect via RS232, RS485, or USB (depending on the PLC model) and watch bit and register states update in real time. The "Status Monitoring" window allows you to force contacts ON/OFF and modify data registers (D) while the PLC is running—critical for troubleshooting. Xinje Plc Program Tool 3.7

: Configures high-speed counting (up to 80kHz), pulse output (up to 100kHz), and X-NET fieldbus functions. Quick Setup & Operation Guide 1. Communication Configuration To establish a connection between your PC and the PLC: Connect the PLC to your PC using a standard USB or RS232-USB converter cable. In the software, go to [Software Serial Port Config] Comm Mode Settings Select the correct identified in your PC's Device Manager. [Comm-Test]

Xinje PLC Program Tool 3.7 (commonly known as XCP Pro v3.7) is the official software configuration suite developed by Xinje Electronic Co., Ltd. It allows automation engineers to program, debug, and maintain Xinje XC series programmable logic controllers (PLCs). This specific version is highly sought after for its stability and lightweight performance on legacy and modern industrial workstations. Key Features of Version 3.7

“You see that?” whispered one apprentice. “It’s compensating for the worn pinion.” Version 3

In Network 1:

: Enables logic verification without physical hardware.

No. Version 3.7 does not have an offline simulator. You must connect to hardware. The "Status Monitoring" window allows you to force

Click the button (or press F7 ). Look at the output window at the bottom to ensure there are "0 Errors" and "0 Warnings". 6. Downloading, Uploading, and Monitoring Code

Xinje PLCs are famous for their robust Modbus RTU/ASCII support. Version 3.7 includes a dedicated communication configuration wizard. You can set a PLC as a Modbus master or slave without writing complex communication ladder code. Simply define baud rates, parity, and slave IDs, and the tool generates the underlying protocol handling.