3-inch bolts, 2.5-inch bolts, barrel nuts, and wooden dowels. Mattress Requirements: Any mattress used must be at least inches, with a thickness between 4 and 6 inches. Assembly Instructions 1. Assemble the Frame
What is the flat side of the spring frame? - Babyletto Support
When storing parts between conversions (such as keeping the footboard safe while using the toddler bed configuration), wrap the wooden panels in moving blankets and store them in a dry, climate-controlled environment to prevent warping. bonavita sheffield lifestyle crib instructions
Are you missing any like the mattress support spring? Share public link
Bolt the four brackets securely into the designated inner holes of the side panels. 3-inch bolts, 2
: Attach the stabilizer bar to the bottom of the crib sides using barrel nuts and 3-1/8" bolts. Tighten securely with the Allen wrench. Install Mattress Support :
Before you begin, inspect all components to ensure nothing was damaged during storage or transit. Lay out the wooden pieces on a carpeted floor or a blanket to prevent scratching the wood finish. Wooden Components Assemble the Frame What is the flat side
Simply remove the toddler guard rail. Ensure the mattress support remains securely fastened at the lowest level. The left, right, and high back panels create the daybed silhouette. 3. The Full-Size Bed Conversion
: Lay down a large blanket, a piece of cardboard, or a rug to prevent scratching the finish on the wooden crib pieces.
Lift the and align it with the front open ends of the left and right side panels.