How to Fix a Cracked Screen on Your Samsung Rex 60 (GT-C3312)
Before you start, look closely at the damage. You need to know what parts are broken. : This is the outer layer you touch. Touch digitizer : This part registers your finger taps.
The screen shows black bleeding ink, rainbow lines, or no image at all.
Use the Phillips screwdriver to remove the four visible screws located in the corners of the rear housing. Step 2: Separate the Housing gt c3312 samsung cracked
A cracked screen can happen to any phone, regardless of how careful you are. A single drop or bump can cause significant damage to the screen. If you're experiencing a cracked screen on your GT C3312, you may be wondering what to do next.
Remove the back cover, battery, SIM cards, and MicroSD card.
Locate the delicate ribbon cable connectors attaching the screen assembly to the motherboard. How to Fix a Cracked Screen on Your
Clean away any residual glue or glass shards from the frame recess using rubbing alcohol. Step 6: Install the New Screen and Reassemble
Turn off the phone and remove the back cover, battery, SIM cards, and SD card.
Do you need help finding for these legacy parts? Touch digitizer : This part registers your finger taps
Insert a plastic pry tool into the seam between the front bezel and the rear housing. Gently slide the tool around the perimeter of the phone to release the plastic clips holding the frame together. Carefully pull the rear housing away from the front assembly. 4. Disconnect the Motherboard
If you have a steady hand and some experience with electronics, you can replace the screen yourself. Cheap (you only pay for parts).
Gently slide a thin plastic pick underneath the cracked digitizer and pry it away from the frame. If your LCD is also broken, you can lift the LCD out of its housing at this stage. 6. Clean the Frame and Install New Parts