Kirisun Radio Programming Software [portable]

Specifically designed for their Tier II DMR digital radios. 3. USB Drivers

At the top of the screen, you will find standard file management options. The most critical icons to look for are:

Here is a deep dive into the features and functions that make the Kirisun programming suite a critical asset for radio fleet managers and enthusiasts alike.

Download the verified Kirisun CPS installer matching your specific model. Run the installer as an . Install the USB cable driver and restart your PC. Step 2: Establish the Physical Connection Ensure the Kirisun radio is completely turned off .

You must install the appropriate USB-to-Serial driver (often Prolific or FTDI) before plugging the cable into your computer. 4. Step-by-Step Programming Guide

Mastering Kirisun Radio Programming Software: A Comprehensive Guide kirisun radio programming software

Import or manually add private IDs or Group Call IDs (Talkgroups).

The USB-to-serial chip embedded inside the cable governs communication between your Windows PC and the radio. Most Kirisun systems rely on the CH341SER or Prolific driver architecture. If your PC fails to recognize the connected radio, it is often due to an outdated or incompatible USB driver. Windows may automatically install a generic update that blocks third-party serial chips, requiring you to manually downgrade or change your driver configuration to restore connectivity. Network Requirements for Repeaters

Precisely input RX/TX frequencies, CTCSS/DCS tones, and channel spacing (12.5kHz vs. 25kHz).

Once the software displays a "Write Success" prompt, the radio will typically reboot automatically.

Set the Channel Spacing (Analog: 12.5kHz or 25kHz / Digital: 12.5kHz). Specifically designed for their Tier II DMR digital radios

Set these to eliminate interference from other groups sharing the same frequency. "CTC" refers to analog sub-audible tones, while "CDC" refers to digital codes. Leave them as "None" if you want to hear all traffic on the frequency.

Assign specific VHF or UHF frequencies to dedicated channels.

Input your assigned operating frequencies in MHz (e.g., 460.12500).

identifies as the required software for this license-free radio. Kirisun DR600

Kirisun positions itself as a strong alternative to the industry leader, , particularly in the MOTOTRBO ecosystem. Both manufacturers use similar DMR technology and customer programming software (CPS). The most critical icons to look for are:

Firmly seat the programming cable into the radio's accessory jack.

Plug the USB end into a direct port on your PC (avoid unpowered USB hubs). Turn the radio volume knob clockwise to power the unit on. Step 3: Configure the Communication Port (COM Port) Open the Windows . Expand the Ports (COM & LPT) section. Note the number assigned to your cable (e.g., COM3 ). Launch the Kirisun CPS.

Locate the or Conventional folder in the left-hand navigation tree. Channel Number: Choose the slot you wish to program.

Require specialized DMR CPS capable of managing digital contacts and timeslots.