Canon Service Tool V.4718 Direct

Enables specific service functions like clearing the print head or cleaning, and resetting the logic board. Supported Canon Printer Models

This is the most common error code. It indicates that the software was opened before the printer was successfully put into Service Mode, or the USB connection was lost. Close the software, power off the printer, and restart the Service Mode button sequence carefully. Error Code 005

This is the most critical technical aspect of using the tool. The software will not function if the printer is in standard "User Mode." The printer must be placed into . canon service tool v.4718

Press the button exactly 5 or 6 times (depending on your specific model; G-series typically requires 5 clicks). The LED light will alternate between green/orange with each click. Release the Power button.

While the ultimate solution requires physically replacing or washing the ink pads, the electronic lock must be reset using software like the Canon Service Tool v.4718 to make the printer operational again. Supported Canon Printer Models Enables specific service functions like clearing the print

Move down to the section, select Main , and click Set to force the value to 0%.

Turn off the printer completely, but leave the power cable plugged in. Close the software, power off the printer, and

Version 4718 is a highly sought-after release of the software because it supports an expanded database of Pixma G-series (MegaTank), MG-series, and TS-series printers. Key functions include:

Right-click on Service Tool v4718.exe and select .

The Canon Service Tool v.4718 is an official software utility used by technicians to communicate with the printer's firmware. It resets the internal Waste Ink Pad Counter, runs deep diagnostic tests, and calibrates printer hardware. Understanding the Waste Ink Pad Error

Ultimate Guide to Canon Service Tool v.4718: Reset Waste Ink Counters