If the battery is still in the vehicle: Connect RED to positive, then BLACK to a solid engine ground (not the negative battery post) to avoid sparking near the battery.
: Fasten the Negative (Black) clamp directly to the Negative (-, NEG) battery terminal.
Whether you have lost your original printed manual or need a quick refresher on how to safely operate this unit, this comprehensive guide covers everything you need to know about the Autocraft AC-60CR. 1. Safety First: Critical Precautions
Autocraft Battery Charger AC-60CR Manual: A Comprehensive Guide autocraft battery charger ac-60cr manual
Clamps are connected incorrectly (positive to negative). 6. Troubleshooting Common Issues
If the hum is excessively loud and accompanied by a rapid circuit breaker trip, check for a reverse polarity connection (clamps reversed) or a shorted cell inside the battery. The battery gets excessively hot or bubbles violently.
A: While the manual does not specify, many Autocraft chargers are designed to handle standard lead-acid, AGM, and gel batteries. The specific capabilities of the AC-60CR would be detailed in its manual. If the battery is still in the vehicle:
Charge the battery at this setting for 3 to 5 minutes to pack a preliminary charge into the cells. Crank the engine for no more than .
Displays current (amps) being drawn; as the battery charges, the needle will typically drop toward zero. 🚀 Operating Instructions 1. Pre-Charging Steps
If the engine does not start, let the charger cool down for before trying again. Attempting to crank continuously will damage both your starter motor and the charger. Troubleshooting Common Issues If the hum is excessively
, an analog automotive charger with engine start capabilities. Product Overview Autocraft AC-60CR
The charger will operate in "Boost" mode for the first 10 minutes if needed, then switch to the selected charge rate.
While specific troubleshooting for the AC-60CR is not available, the following are common issues with battery chargers that can help you diagnose problems.